Automatic transmission of your automobile is an important part, and it will largely control the performance of your vehicle. However, the automatic transmission will wear and tear due to rough shifting and slips while driving your vehicle. Unfortunately, repairing or replacing an automatic shifting system of your car or SUV can be truly costly.
Lucas lubricant is an advanced non-solvent formula, and it works perfectly to stop and prevent rough shifting, slipping, and hesitation of the gear system. Although it can’t repair a damaged transmission, it will surely reduce the wear and tear and prolong the lifespan of your car’s auto gear-shift system supremely.
![Does Lucas Transmission Fix Work - [An Expert Guidance]](https://www.autocarneed.com/wp-content/uploads/2022/11/Does-Lucas-Transmission-Fix-Work-An-Expert-Guidance.jpg)
Read also >> Lucas Transmission Fix Vs Conditioner: (5 Key Differences)
Does Lucas Transmission Fix Actually Work?
Lucas Oil is a famous automotive additive manufacturer worldwide. Over the years, they have introduced many additives and lubricants to maintain automobiles in good condition. One of their premium additives is the Lucas Transmission Fix.
Thankfully, it works perfectly well in maintaining your vehicle’s shifting system. In most cases, adding the solvent will improve the shifting smoothness of your vehicle.
When you use the additive with the existing fluid of your car, it comes with the following benefits for the vehicle’s gear system.
1 – A non-solvent transmission fix:
One of the key benefits of using the Lucas transmission is its non-solvent nature. If the fluid additive of the item is solvent, it won’t deliver the right output you want. Since the lubricant is non-solvent, it won’t reduce the lubrication properties of the product.
Therefore, it won’t increase the heat of the seal and gear shift. So, it is a pretty safe additive to stop the wear and tear of the vehicle’s gear-shifting system.
2 – Prevents friction and extended lifespan:
The Lucas product prevents hesitation of your vehicle due to poor band and clogged valves. When you apply the additive to the car’s transmission system, it will improve the condition of the gear-shifting band. Also, it reduces the friction of the clutch plates to extend their lifespan.
3 – Smoothens the gear shifting:
Next up, applying the fixing product will smoothen the gear shifting of your vehicle. Further, I will improve the engagement of the gear plates with the clutch plates superbly. Thus, you will enjoy a great driving experience with the vehicle.
4 – Stops leakage of the seal and valve:
The seals of the vehicle’s transmission should be leak-proof entirely and smooth. But, with the usage, it eventually becomes hard and stiff. Consequently, it breaks down and causes you a costly repair. A damaged seal will leak fluid from the gear system.
So, you should add lubricant fluid to help the seal perform better. The lubricating agent does the same with its excellent non-solvent additive. Also, its non-solvent nature will prevent overheating issues.
5 – Usable with existing transmission fluid:
While most additives and fluids strictly limit you from using them with the existing fluid, this product is the opposite of these lubricants. Yes, it allows you to add the non-solvent additive to the existing fluid of your car. It is an amazing benefit as it reduces the wastage of the existing lubricating solution.
The solution comes pretty thicker right out of its bottle. Therefore, you can confidently add it with the existing fluid of your car’s transmission system.
how long does lucas transmission fix last?
You must understand that no additive or lubricant of your vehicle will work forever. A similar goes true for the Lucas additive. So, you need to know about its lifespan to charge it timely. Or else, it will lose its properties, and the gear system will get damaged.
The product, as experts suggest, will work best for at least a couple of months. After this period, the shifting system will again start acting and get damaged as the fluid will fail. So, you should reapply the solution once every 5 to 6 months to increase your driving smoothness. It will also stop overheating and provide you with better safety.
Read also >> Does Lucas Upper Cylinder Lubricant Work? How Do You Use?
can i add lucas transmission fix to a full transmission?
Although changing the existing filter and fluid before using the Lucas gear-shifting fluid is recommended, you can add it with the existing full transmission. For this, first, remove the dipstick. After that, use a funnel to pour in the lubricating solution.
Nonetheless, you should check the vehicle’s dipstick while the car is running before adding the item with the full shifting. Otherwise, it risks spilling and wastage of the product.
Nonetheless, you should remove some of the existing fluid from the system if the existing additive is at the full mark. Do it carefully not to ruin your clothing.
lucas transmission fix how to use
The usability of the Lucas Transmission fix is user-friendly. To use the additive properly, you should change the filter and the remaining fluid oil of the vehicle. Also, check the fluid mark while you drive the vehicle to check its mark. Ideally, you should change the entire fluid to apply the non-solvent additive. But, you may also use it with the existing fluid.
You need to ensure that the space marked isn’t full before applying the lubricating additive.
After applying the fluid, you need to drive your vehicle for at least 15 to 20 minutes. The Lucas additive for gear shifting will perfectly blend with the existing one when you drive the car. So, you will see an improvement almost ASAP.
To learn more about Easy way to use Lucas Transmission Stop Slip Additive watch this YouTube videos.
Where do I add Lucas Transmission Fix?
You will need to add the additive to your vehicle’s dipstick. It comes in yellow color, and once you open the car’s hood, you should find it easily. If you still find it difficult to locate the dipstick, you can check your vehicle’s user manual.
Use a funnel to pour the solution inside the vehicle’s dipstick securely.After that, run your car for 15 to 20 minutes to help the fluid mix with the existing additive.
can you add lucas transmission fix without draining?
Yes, you can add the product without draining its existing fluid. The only thing you need to look for is not to overflow the vehicle’s dipstick. So, inspect the dipstick and find if the fluid mark is full. If the dipstick is full, you may drain it by adding the new fluid. Usually, one bottle of the fix will be enough for your car.
Do you add Lucas Transmission Fix while the car is running
No, you shouldn’t add the product when the car is running to avoid overheating problems. First, run your car to reach the operating temperature. Then, leave the car idle to allow it to cool down for 20 minutes. After that, you can add the lubricating agent.
What is the best alternative for Lucas Transmission Fix
If you don’t want to use the Lucas fluid, there’re a few alternatives to it. The list includes:
- The Lubegard Dr. Tranny Instant Shudder Fix is suitable for torque converter shudder. It is actually a concentrated friction modifier and works quite satisfactorily.
- Another good alternative can be the ATP AT-205 Re-Seal Stops Leaks. It will stop the seal leaks with greater efficiency.
You might also like>> 7 Sign Of Bad Transmission Fluid
Final Words
Lucas Transmission Fix works brilliantly to stop the seal leak and improve the friction for a smooth car driving experience. Also, it will save you from the costly repair of the gear shifting system. Lucas has been in the automotive lubricant industry for quite a long period now. Thus, you can depend on their product quality and performance.
Nonetheless, you must remember that applying the solution isn’t the only option for the vehicle; instead, you must maintain it properly for the best performance.
